sE Electronics X1 S Microphone - Studio Condenser Microphone with Reflexion Filter

sE Electronics X1 S Microphone - Studio Condenser Microphone with Reflexion Filter arrives as a compact, professional-grade studio solution that combines a classic condenser voice coil with an integrated reflexion filter and accessories for immediate use.

The sE X1 S is a studio microphone designed for vocal and instrument recording, featuring a cardioid polar pattern to focus on the source and reject off-axis noise. With a frequency response of 20–20,000 Hz and a sensitivity of -30.5 dB (30 mV/Pa at 1 kHz), it captures detailed audio across the audible spectrum.

Built for reliable performance, the microphone provides an impressive dynamic range of 151 dB and a signal-to-noise ratio of 85 dB. The equivalent noise level is a low 9 dB, and the recommended load impedance is 1000 Ω with an input impedance of 125 Ω to ensure consistent electrical matching in professional setups.

Practical onboard controls include a 160 Hz low-cut filter to reduce rumble and proximity effects, plus a 20 dB attenuation pad for high SPL situations. The X1 S requires 48 V phantom power and draws just 6 mA, connecting via the standard XLR-3 wired interface for studio consoles and preamps.

The package is tailored for recording use straight out of the box: it includes the RF-X Reflexion Filter, an Isolation Pack with pop shield, and a 3-meter XLR mic cable. The microphone itself is finished in black, measures 169 mm in height with a 5.8 cm diameter, and weighs 445 g.

Typical use cases include home and project studios, voice-over and podcasting sessions, singer-songwriter recordings, and close-miked acoustic instruments where the cardioid pickup and reflexion filter help achieve a clean, focused capture. Certification to IEC 61938 underlines its suitability for professional audio work.

Key selling points are its low self-noise, wide dynamic range, built-in isolation accessories, and straightforward XLR connectivity, making the sE X1 S a strong choice for those seeking a versatile condenser microphone with immediate studio-ready isolation.

• Cardioid condenser capsule, 20–20,000 Hz response
• Sensitivity -30.5 dB (30 mV/Pa), SNR 85 dB
• Includes RF-X Reflexion Filter, Isolation Pack, 3 m XLR cable
• Low-cut 160 Hz and 20 dB pad, requires 48 V phantom
• Compact, robust black design: 169 mm × 5.8 cm, 445 g